安全限位开关
规格
| 规范 | EN60947-5-1, UL508, EN50047, EN1088 |
| 强制操作 | NC Contact |
| 使用类别 | AC15 A600 |
| 最小电流 | 5V, 5mA, DC |
| 额定开路热电流 | 10A |
| 额定绝缘电压 | 600V AC |
| 额定耐冲击电压 | 2500V AC |
| 绝缘电阻 | 100MΩ min.(DC 500V) |
| 接触电阻（初始值） | 25mΩ max.(Initial) |
| 最大开关速度 | 250mm/s |
| 允许的最大开关频率 | 6000 operation per hour |
| 本体材质 | UL approved glass-filled polybutylene terephthalate |
| 外壳保护等级 | IP 67 |
| 环境温度 | Min -25°C (-18°F) Max 80°C (+176°F) |
| 污染度 | 3 |
| 触电防护等级 | Class II (Double Insulation) |
| 机械耐久性 | 1 x 106 Cycles min |
| 电气耐久性 | 150,000 Cycle min |
| 耐震动 | IEC 68-2-6, 10-55Hz±1 Hz, Excursion: 0.35mm, 1 octave/min |
| 导管口尺寸 | Various (see Product Selection table) |
| 安装方式 | 2 x M4 |
>产品选型
操作特性
Item No. | Dimensions
| Unit: mm | ||||||||
| EDR-20 Roller Arm Type | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| EDR-x-1-20 | Slow 1NC/1NO | 30 | 41 | 6.5 N | 45 | 19.0 N | 80 | |
| EDR-x-2-20 | Slow 2NC | 30 | - | 6.5 N | ||||
| EDR-x-3-20 | Snap 1NC/1NO | 28 | - | 5.3 N | ||||
| EDR-x-4-20 | Slow 2NC/1NO | 30 | 41 | 6.5 N | ||||
| EDR-x-5-20 | Slow 3NC | 30 | - | 6.5 N | ||||
Item No. | Dimensions
| Unit: mm | ||||||||
| EDR-21 Adjustable Roller Arm Type (Standard arm) | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| EDR-x-1-21 | Slow 1NC/1NO | 30 | 41 | 6.5 N | 45 | 19.0 N | 80 | |
| EDR-x-2-21 | Slow 2NC | 30 | - | 6.5 N | ||||
| EDR-x-3-21 | Snap 1NC/1NO | 28 | - | 5.3 N | ||||
| EDR-x-4-21 | Slow 2NC/1NO | 30 | 41 | 6.5 N | ||||
| EDR-x-5-21 | Slow 3NC | 30 | - | 6.5 N | ||||
Item No. | Dimensions
| Unit: mm | ||||||||
| EDR-22 Adjustable Roller Arm Type (Long arm) | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| EDR-x-1-22 | Slow 1NC/1NO | 30 | 41 | 5.2N | 45 | 19.0 N | 80 | |
| EDR-x-2-22 | Slow 2NC | 30 | - | 5.2 N | ||||
| EDR-x-3-22 | Snap 1NC/1NO | 28 | - | 4.5 N | ||||
| EDR-x-4-22 | Slow 2NC/1NO | 30 | 41 | 5.2 N | ||||
| EDR-x-5-22 | Slow 3NC | 30 | - | 5.2 N | ||||
Item No. | Dimensions
| Unit: mm | ||||||||
| EDR-25 Rod Lever Type | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| EDR-x-1-25 | Slow 1NC/1NO | 30 | 41 | 1.8N | 45 | 19.0 N | 80 | |
| EDR-x-2-25 | Slow 2NC | 30 | - | 1.8N | ||||
| EDR-x-3-25 | Snap 1NC/1NO | 28 | - | 1.9N | ||||
| EDR-x-4-25 | Slow 2NC/1NO | 30 | 41 | 1.8N | ||||
| EDR-x-5-25 | Slow 3NC | 30 | - | 1.8N | ||||
Item No. | Dimensions
| Unit: mm | ||||||||
| EDR-27 Adjustable Roller Arm Type (Big roller) | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| EDR-x-1-27 | Slow 1NC/1NO | 30 | 41 | 5.2N | 45 | 19.0 N | 80 | |
| EDR-x-2-27 | Slow 2NC | 30 | - | 5.2N | ||||
| EDR-x-3-27 | Snap 1NC/1NO | 28 | - | 4.5N | ||||
| EDR-x-4-27 | Slow 2NC/1NO | 30 | 41 | 5.2N | ||||
| EDR-x-5-27 | Slow 3NC | 30 | - | 5.2N | ||||
Item No. | Dimensions
| Unit: mm | ||||||||
| EDR-31 Push Plunger Type | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| EDR-x-1-31 | Slow 1NC/1NO | 2.2mm | 3.0 | 7.26N | 3.2mm | 19.0 N | 6.0mm | |
| EDR-x-2-31 | Slow 2NC | 2.2mm | - | 7.42N | ||||
| EDR-x-3-31 | Snap 1NC/1NO | 1.9mm | - | 6.71N | ||||
| EDR-x-4-31 | Slow 2NC/1NO | 2.2mm | 3.0 | 7.26N | ||||
| EDR-x-5-31 | Slow 3NC | 2.2mm | - | 7.42N | ||||
Item No. | Dimensions
| Unit: mm | ||||||||
| EDR-32 Roller Plunger Type | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| EDR-x-1-32 | Slow 1NC/1NO | 2.2mm | 3.0 | 7.26N | 3.2mm | 19.0 N | 6.0mm | |
| EDR-x-2-32 | Slow 2NC | 2.2mm | - | 7.42N | ||||
| EDR-x-3-32 | Snap 1NC/1NO | 1.9mm | - | 6.71N | ||||
| EDR-x-4-32 | Slow 2NC/1NO | 2.2mm | 3.0 | 7.26N | ||||
| EDR-x-5-32 | Slow 3NC | 2.2mm | - | 7.42N | ||||
Item No. | Dimensions
| Unit: mm | ||||||||
| EDR-62 Roller Lever Type | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| EDR-x-1-62 | Slow 1NC/1NO | 3.0mm | 4.5mm | 5.21N | 5.7mm | 19.0 N | 5.2mm | |
| EDR-x-2-62 | Slow 2NC | 3.0mm | - | 5.26N | ||||
| EDR-x-3-62 | Snap 1NC/1NO | 2.9mm | - | 4.74N | ||||
| EDR-x-4-62 | Slow 2NC/1NO | 3.0mm | 4.5mm | 5.21N | ||||
| EDR-x-5-62 | Slow 3NC | 3.0mm | - | 5.26N | ||||
Item No. | Dimensions
| Unit: mm | ||||||||
| ED-63 One-Way Roller Arm Lever Type | ||||||||
| Operating Characteristics | ||||||||
| Type | Contact Block | Operating travel (PT) |
PT2nd | Operating Force (OF) |
Positive Opening | Total Travel |
||
| Travel (min) |
Force (min) |
|||||||
| ED-x-1-63 | Slow 1NC/1NO | 4.0mm | 6.0mm | 6.37N | 4.6mm | 19.0 N | 9.8mm | |
| ED-x-2-63 | Slow 2NC | 4.0mm | - | 6.98N | ||||
| ED-x-3-63 | Snap 1NC/1NO | 3.6mm | - | 5.76N | ||||
| ED-x-4-63 | Slow 2NC/1NO | 4.0mm | 6.0mm | 6.37N | ||||
| ED-x-5-63 | Slow 3NC | 4.0mm | - | 6.98N | ||||
认证
档案下载